The microFAST MC combines the advantages of the SC-µDX autosampler with single or dual loop FAST capabilities and syringe based sample loading/injection. The system accurately loads a loop and then smoothly injects the solution into a μFlow concentric nebulizer at defined rates from 5-1000 μL/min. The valve on the flow injection system selects from two discrete, parallel flow paths. This allows rapid switching between solutions with minimal dead volume between the valve and the nebulizer.
The apex Ω desolvating nebulizer is the highest performing ICPMS sample introduction system available. An innovative multistage Peltier-cooled desolvation system combined in series with a helical EPTFE fluoropolymer membrane desolvator simultaneously maximizes ICPMS sensitivity and reduces oxides.
The apex2 desolvating nebulizer is a high performance sample introduction system which increases sample transport efficiency utilizing a heated spray chamber and peltier condenser to improve sensitivity. It now benefits from a mass flow controller to provide more stable Nitrogen addition flow rates, an integrated MP2 peristaltic pump for drainage improving stability and full software control.
ICP and ICPMS sample integrity is maintained with the ESI SC-DX autosampler enclosures. The enclosures can be configured either as a dust cover or ULPA-filtered minienvironment.
The ULPA (Ultra-Low Particle Arrester) filter creates a clean, positive pressure environment for samples and standards and prevents airborne contamination. The ULPA filter removes 99.999% of 0.12 micron particles.
The ULPA filter mounting plate fits the SC-2 DX, SC-4 DX, SC-µDX and microFAST-MC on either the right or left side of the enclosure.
|ULPA Filter Specifications|
|Aire Volume||Noise Level||Power|
|1 m3/min||56 dBA||25W|
|SC-0602||ULPA Filter for ESI Enclosures|
21 Position Micro Sample Rack
14mm diameter - Fits 1mL, 2mL, & 4mL vials
(Fits: V-14-0311CG, V-14-0312CG, V-14-0314CG, V-14-0712, VPC-14-0712)
1mL volume, brim full 2mL
V-14-0311CG-X - Qty 10
2mL volume, brim full 3mL
V-14-0312CG-X - Qty 10
4mL volume, brim full 4.5mL
V-14-0314CG-X - Qty 10
This rigid plastic microplate cover is primarily used to protect against environmental contamination.96-well, 500μL microplate, polystyrene